Driving with Faulty Wheel Bearings? Here's How to Spot and Fix Them

Faulty wheel bearings can be a major safety hazard, but they're often overlooked because they can be difficult to diagnose. If you're experiencing any of the symptoms listed below, it's important to have your wheel bearings checked by a qualified mechanic as soon as possible.

Grinding noise: This is the most common symptom of faulty wheel bearings. It can be caused by wear and tear, or by contamination of the bearing with dirt or debris.

Squealing noise: This is another common symptom of faulty wheel bearings. It can be caused by a lack of lubrication, or by a damaged bearing race.

Vibration: Faulty wheel bearings can cause the wheel to wobble, which can lead to vibration in the steering wheel or the body of the car.

Loose steering: Faulty wheel bearings can cause the steering to feel loose or sloppy. This can be dangerous, as it can make it difficult to control the car.

Benefits of Replacing Faulty Wheel Bearings

Replacing faulty wheel bearings can provide a number of benefits, including:

Improved safety: Faulty wheel bearings can be a major safety hazard, so replacing them can help to reduce the risk of an accident.

Reduced noise: Replacing faulty wheel bearings can help to reduce noise levels, making your car more comfortable to drive.

Improved handling: Replacing faulty wheel bearings can help to improve handling, making your car more responsive and easier to control.

Increased fuel efficiency: Replacing faulty wheel bearings can help to reduce rolling resistance, which can lead to increased fuel efficiency.

How to Replace Faulty Wheel Bearings

Replacing faulty wheel bearings is a job that can be done at home with the right tools and a little bit of mechanical knowledge. However, it's important to note that this is a complex repair, and it's best to leave it to a qualified mechanic if you're not confident in your abilities.

If you're planning to replace faulty wheel bearings yourself, here are some tips:

Gather the necessary tools and materials. You will need a jack, jack stands, a lug wrench, a socket wrench, a torque wrench, a new wheel bearing, and a new axle nut.

Safety first! Park your car on a flat, level surface and engage the parking brake. Place wheel chocks behind the wheels that will not be replaced.

Locate the faulty wheel bearing. The faulty wheel bearing will be located on the hub of the wheel.

Remove the wheel. Use the lug wrench to loosen the lug nuts, then remove the wheel.

Remove the axle nut. Use the socket wrench to remove the axle nut.

Remove the old wheel bearing. Use a pry bar to remove the old wheel bearing from the hub.

Install the new wheel bearing. Place the new wheel bearing on the hub and use a hammer to tap it into place.

Tighten the axle nut. Use the torque wrench to tighten the axle nut to the specified torque.

Reinstall the wheel. Place the wheel on the hub and tighten the lug nuts.

Lower the car. Use the jack to lower the car and remove the jack stands.

Test drive the car. Drive the car for a few miles to test the new wheel bearing.

Common Mistakes to Avoid When Replacing Faulty Wheel Bearings

Here are some common mistakes to avoid when replacing faulty wheel bearings:

Overtightening the axle nut. Overtightening the axle nut can damage the wheel bearing.

Using the wrong tools. Using the wrong tools can make it difficult to remove the old wheel bearing and install the new one.

Not cleaning the hub. If the hub is not clean, the new wheel bearing will not fit properly.

Not torquing the axle nut to the specified torque. Not torquing the axle nut to the specified torque can lead to the wheel bearing failing prematurely.

Conclusion

Replacing faulty wheel bearings is a complex repair, but it's one that can be done at home with the right tools and a little bit of mechanical knowledge. By following the tips in this article, you can avoid the common mistakes and ensure that your car is safe to drive.

Benefit	How to
Improved safety	Replace faulty wheel bearings as soon as possible.
Reduced noise	Use high-quality wheel bearings that are designed to reduce noise.
Improved handling	Replace faulty wheel bearings with new ones that are properly aligned.
Increased fuel efficiency	Choose wheel bearings that are designed to reduce rolling resistance.

Mistake	How to avoid
Overtightening the axle nut	Use a torque wrench to tighten the axle nut to the specified torque.
Using the wrong tools	Use the correct tools for the job.
Not cleaning the hub	Clean the hub thoroughly before installing the new wheel bearing.
Not torquing the axle nut to the specified torque	Use a torque wrench to tighten the axle nut to the specified torque.

Driving with Faulty Wheel Bearings? Here's How to Spot and Fix Them